+
S 6110 Analytical Injection Valve

The S 6010 is a stainless steel analytical injection valve to be used in autosamplers or other motordriven applications. The 6110 is the identical valve with inert PEEK stator. These valves feature the No-Flow-Interruption (NFI) technology which reduces pressure spikes during position switching to a minimum. The S 6010/6110 is shipped with a 20 ┬Ál sample loop; it is otherwise identical with the S6030/6130 valve. A variety of rotor seal materials are available to cover any type of application.

+
S 6120 Needle Injection Valve

The S 6020 is a stainless steel 2-position valve with needle injection port on the front side. The 6120 is the identical valve with inert PEEK stator. These valves feature the No-Flow-Interruption (NFI) technology which reduces pressure spikes during position switching to a minimum. The needle port can be used with standard microliter syringes (e.g. Hamilton) or plastic type syringes with 0.7mm needles. The S 6020/6120 have a built-in position sensor for starting data acquisition precisely at the point of injection. A variety of rotor seal materials are available to cover any type of application.

+
S 6130 2×3-Way Analytical Valve

The S 6030 is a stainless steel analytical 2-Position, 3-Way switching valve to be used in instruments as motor-driven valve. The 6130 is the identical valve with inert PEEK stator. A variety of rotor seal materials are available to cover any type of application. An optional manual switching handle can be provided when the valve is not used in a motor-driven application.

+
S 6140 1×6-Way Analytical Valve

The S 6040 is a stainless steel analytical 6-Position, 1-Way switching valve to be used as selection valve. The 6140 is the identical valve with inert PEEK stator. A variety of rotor seal materials are available to cover any type of application. An optional manual switching handle can be provided when the valve is not used in a motor-driven application.

+
S 6150 1×10-Way Analytical Valve

The S 6050 is a stainless steel analytical 10- Position, 1-Way switching valve to be used as selection valve. The 6150 is the identical valve with inert PEEK stator. A variety of rotor seal materials are available to cover any type of application. An optional manual switching handle can be provided when the valve is not used in a motor-driven application.

+
S 6160 2×10-Way Analytical Valve

The S 6050 is a stainless steel analytical 2-Position, 10-Way switching valve to be used as selection valve. The 6160 is the identical valve with inert PEEK stator. A variety of rotor seal materials are available to cover any type of application. An optional manual switching handle can be provided when the valve is not used in a motor-driven application.

+
S 6015/6115 Autosampler Injection Valve

The S 6015 is a stainless steel 2-position valve with needle injection port on the top side. The 6115 is the identical valve with inert PEEK stator. These valves feature the No-Flow-Interruption (NFI) technology which reduces pressure spikes during position switching to a minimum. The needle port can be used with any autosampler system. The direct injection into the valve makes a separate injection port unnecessary. A variety of rotor seal materials are available to cover any type of application.